3Com 4210G Series, Configuration Manual, Page: 927 / 1133

12-12
# Check files on your device. Remove those redundant to ensure adequate space for the startup file to
be uploaded.
<Sysname> dir
Directory of flash:/
0 -rw- 10471471 Sep 18 2008 02:45:15 4210G-d501.bin
1 -rw- 9989823 Jul 14 2008 19:30:46 4210G_b57.bin
2 -rw- 6 Apr 26 2000 12:04:33 patchstate
3 -rw- 2337 Apr 26 2000 14:18:45 config.cfg
4 drw- - Apr 26 2000 13:10:56 test
5 -rw- 2337 Apr 26 2000 13:47:32 archive_1.cfg
6 -rw- 478164 Apr 26 2000 14:52:35 4210G.btm
7 -rw- 368 Apr 26 2000 12:04:04 patch_xxx.bin
8 -rw- 2337 Apr 26 2000 14:16:48 sfp.cfg
9 -rw- 2195 Apr 26 2000 14:10:41 4210GD.cfg
31496 KB total (11004 KB free)
<Sysname> delete /unreserved flash:/sfp.cfg
2) Configure the PC (FTP Client)
# Log in to the FTP server through FTP.
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)):abc
331 Password required for abc.
Password:
230 User logged in.
# Download the configuration file
config.cfg
of the device to the PC for backup.
ftp> get config.cfg back-config.cfg
# Upload the configuration file
newest.bin
to Device.
ftp> put newest.bin
ftp> bye
z
You can take the same steps to upgrade configuration file with FTP. When upgrading the
configuration file with FTP, put the new file under the root directory of the storage medium (For a
device that has been partitioned, the configuration file must be saved on the first partition.).
z
After you finish upgrading the Boot ROM program through FTP, you must execute the
bootrom
update
command to upgrade the Boot ROM.
3) Upgrade
Device
# Specify
newest.bin
as the main startup file to be used at the next startup.