3Com 4210G Series, Configuration Manual, Page: 925 / 1133

12-10
To do… Use the command… Remarks
Manually release the FTP
connection established with the
specified username
free ftp user username
Optional
Available in user view
Configuring Authentication and Authorization on the FTP Server
To allow an FTP user to access certain directories on the FTP server, you need to create an account
for the user, authorizing access to the directories and associating the username and password with the
account.
The following configuration is used when the FTP server authenticates and authorizes a local FTP user.
If the FTP server needs to authenticate a remote FTP user, you need to configure authentication,
authorization and accounting (AAA) policy instead of the local user. For detailed configuration, refer to
AAA Configuration
in the
Security Volume
.
Follow these steps to configure authentication and authorization for FTP server:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a local user
and enter its view
local-user user-name
Required
No local user exists by default, and the
system does not support FTP
anonymous user access.
Assign a password to
the user
password
{
simple
|
cipher
}
password
Required
Assign the FTP
service to the user
service-type ftp
Required
By default, the system does not
support anonymous FTP access, and
does not assign any service. If the
FTP service is assigned, the root
directory of the device is used by
default.
Configure user
properties
authorization-attribute
{
acl
acl-number
|
callback-number
callback-number
|
idle-cut
minute
|
level level
|
user-profile
profile-name
|
vlan vlan-id
|
work-directory directory-name
}
*
Optional
By default, the FTP/SFTP users can
access the root directory of the device,
and the user level is 0. You can
change the default configuration by
using this command.