manualshive.com logo in svg

3Com 4210G Series, Configuration Manual, Page: 685 / 1133

Share
Download
3Com 4210G Series Configuration Manual Download Page 685

 

13-6 

1)  Sort rules by source IPv6 address prefix first and compare packets against the rule configured 

with a longer prefix for the source IPv6 address. 

2)  In case of a tie, compare packets against the rule configured first. 

Depth-first match for an advanced IPv6 ACL 

The following shows how your device performs depth-first match in an advanced IPv6 ACL:   
1)  Look at the protocol type field in the rules first. A rule with no limit to the protocol type (that is, 

configured with the 

ipv6

 keyword) has the lowest precedence. Rules each of which has a single 

specified protocol type are of the same precedence level. Compare packets against the rule with 
the highest precedence. 

2)  In case of a tie, look at the source IPv6 address prefixes. Then, compare packets against the rule 

configured with a longer prefix for the source IPv6 address. 

3)  If the prefix lengths for the source IPv6 addresses are the same, look at the destination IPv6 

address prefixes. Then, compare packets against the rule configured with a longer prefix for the 
destination IPv6 address.   

4)  If the prefix lengths for the destination IPv6 addresses are the same, look at the Layer 4 port 

number ranges, namely the TCP/UDP port number ranges. Then compare packets against the 
rule configured with the smaller port number range. 

5)  If the port number ranges are the same, compare packets against the rule configured first.   
The comparison of a packet against an ACL stops immediately after a match is found. The packet is 
then processed as per the rule.   

IPv6 ACL Step 

Refer to 

IPv4 ACL Step

. 

Effective Period of an IPv6 ACL 

Refer to 

Effective Period of an IPv4 ACL

. 

ACL Application 

ACLs are widely used in technologies. One typical application is to apply different types of ACLs for 
traffic filtering. For details, refer to 

ACL Application for Packet Filtering

. 

In addition, ACLs can be used in such fields as routing, security, and QoS. For configuration details, 
refer to the related parts of this configuration manual. 
 
 

Summary of Contents for 4210G Series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments