manualshive.com logo in svg

3Com 4210G Series, Configuration Manual, Page: 1054 / 1133

Share
Download
3Com 4210G Series Configuration Manual Download Page 1054

 

25-6 

Multicast mode 

Figure 25-6 

Multicast mode 

Network

Client

Server

After receiving the first 

multicast message, the 

client sends a request

Clock synchronization message 

exchange (Mode 3 and Mode 4)

Periodically multicasts clock 

synchronization messages (Mode 5)

Calculates the network delay 

between client and the server 

and enters the multicast 

client mode

Periodically multicasts clock 

synchronization messages (Mode 5)

 Receives multicast

messages and synchronizes 

its local clock

 

 
In the multicast mode, a server periodically sends clock synchronization messages to the 
user-configured multicast address, or, if no multicast address is configured, to the default NTP 
multicast address 224.0.1.1, with the Mode field in the messages set to 5 (multicast mode). Clients 
listen to the multicast messages from servers. After a client receives the first multicast message, the 
client and the server start to exchange messages, with the Mode field set to 3 (client mode) and 4 
(server mode) to calculate the network delay between client and the server. Then, the client enters the 
multicast client mode and continues listening to multicast messages, and synchronizes its local clock 
based on the received multicast messages. 
 

 

In symmetric peers mode, broadcast mode and multicast mode, the client (or the symmetric active 
peer) and the server (the symmetric passive peer) can work in the specified NTP working mode only 
after they exchange NTP messages with the Mode field being 3 (client mode) and the Mode field being 
4 (server mode). During this message exchange process, NTP clock synchronization can be 
implemented. 

 

Multiple Instances of NTP 

The client/server mode and symmetric mode support multiple instances of NTP and thus support clock 
synchronization within more than one VPN network. Namely, network devices at different physical 
location can get their clocks synchronized through NTP, as long as they are in the same VPN.   

NTP Configuration Task List 

Complete the following tasks to configure NTP: 

Task 

Remarks 

Configuring the Operation Modes of NTP 

Required 

Configuring Optional Parameters of NTP 

Optional 

Summary of Contents for 4210G Series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments