manualshive.com logo in svg

3Com 4210G Series, Configuration Manual, Page: 607 / 1133

Share
Download
3Com 4210G Series Configuration Manual Download Page 607

 

7-4 

[SwitchA-GigabitEthernet1/0/2] user-bind ip-address 192.168.0.3 mac-address 0001-0203-0405 

[SwitchA-GigabitEthernet1/0/2] quit 

# Configure port GigabitEthernet 1/0/1 of Switch A to allow only IP packets with the source MAC 
address of 00-01-02-03-04-06 and the source IP address of 192.168.0.1 to pass. 

[SwitchA] interface gigabitethernet 1/0/1 

[SwitchA-GigabitEthernet1/0/1] user-bind ip-address 192.168.0.1 mac-address 0001-0203-0406 

2)  Configure Switch B 
# Configure the IP addresses of various interfaces (omitted). 
# Configure port GigabitEthernet 1/0/2 of Switch B to allow only IP packets with the source MAC 
address of 00-01-02-03-04-06 and the source IP address of 192.168.0.1 to pass. 

<SwitchB> system-view 

[SwitchB] interface gigabitethernet 1/0/2 

[SwitchB-GigabitEthernet1/0/2] user-bind ip-address 192.168.0.1 mac-address 0001-0203-0406 

[SwitchB-GigabitEthernet1/0/2] quit 

# Configure port GigabitEthernet 1/0/1 of Switch B to allow only IP packets with the source MAC 
address of 00-01-02-03-04-07 and the source IP address of 192.168.0.2 to pass. 

[SwitchB] interface gigabitethernet 1/0/1 

[SwitchB-GigabitEthernet1/0/1] user-bind ip-address 192.168.0.2 mac-address 0001-0203-0407 

3)  Verify the configuration 
# On Switch A, static binding entries are configured successfully. 

<SwitchA> display user-bind 

Total entries found: 2 

 MAC               IP               Vlan   Port                         Status 

 0001-0203-0405   192.168.0.3      N/A    GigabitEthernet1/0/2          Static 

 0001-0203-0406   192.168.0.1      N/A    GigabitEthernet1/0/1          Static 

# On Switch B, static binding entries are configured successfully. 

<SwitchB> display user-bind 

Total entries found: 2 

MAC               IP               Vlan   Port                         Status 

 0001-0203-0406   192.168.0.1      N/A    GigabitEthernet1/0/2         Static 

 0001-0203-0407   192.168.0.2      N/A    GigabitEthernet1/0/1         Static 

Dynamic Binding Function Configuration Example 

Network requirements 

Switch A connects to Client A and the DHCP server through ports GigabitEthernet 1/0/1 and 
GigabitEthernet 1/0/2 respectively. DHCP snooping is enabled on Switch A.   
Detailed requirements are as follows: 

z

 

Client A (with the MAC address of 00-01-02-03-04-06) obtains an IP address through the DHCP 
server.  

z

 

On Switch A, create a DHCP snooping entry for Client A.   

z

 

On port GigabitEthernet 1/0/1 of Switch A, enable dynamic binding function to prevent attackers 
from using forged IP addresses to attack the server. 

 

Summary of Contents for 4210G Series














































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments