3Com 4210G Series, Configuration Manual, Page: 623 / 1133

8-14
Figure 8-2
SSH client configuration interface
In the window shown in
Figure 8-2 , click
Open
. If the connection is normal, you will be prompted to
enter the username and password. After entering the correct username (
client001
) and password
(
aabbcc
), you can enter the configuration interface.
When Switch Acts as Server for Publickey Authentication
Network requirements
z
As shown in Figure 8-3 , a local SSH connection is established between the host (the SSH client)
and the switch (the SSH server) for secure data exchange.
z
Publickey authentication is used, the algorithm is RSA.
Figure 8-3
Switch acts as server for publickey authentication
SSH client SSH server
Host Switch
192.168.1.56/24
Vlan-int1
192.168.1.40/24
Configuration procedure
1) Configure the SSH server
# Generate RSA and DSA key pairs and enable SSH server.
<Switch> system-view
[Switch] public-key local create rsa