3Com 4007 Implementation Manual Download Page 69 | Manualshive

Page: 69 / 684

3Com 4007 Implementation Manual Download Page 69

EME Technical Specifications

69

EME Technical
Specifications

Table 15 lists general specifications, Table 16 lists power specifications,
Table 17 lists environmental specifications, and Table 18 lists mechanical
specifications for the EME.

Table 15

EME General Specifications

Element

Specification

Connectors

One front panel RS-232 shielded DB-9 connector for
console port connections

One front panel RS-232 shielded DB-9 connector for
auxiliary port connections

One RJ-45 10BASE-T Ethernet Port

Processors

One Motorola 68EC040 processor and two Motorola
68302 processors

Memory

16 MB of Flash EPROM
6 MB of RAM

512 KB of Flash PROM for controller functions
512 KB of SRAM for controller functions

External Modem Support

For 100% Hayes-compatible modems

Baud rates supported up to 38,400 baud

Table 16

EME Power Specifications

Element

Power Consumption

EME

12 W @ 5 V
1.0 W @ +12 V

Table 17

EME Environmental Specifications

Specification

Range

Operating temperature

0 °C to 50 °C (32 °F to 122 °F)

Humidity

Less than 95%, noncondensing

BTU/hr

46

Table 18

EME Mechanical Specifications

Element

Specification

Maximum slots

One EME per slot

Weight

0.45 kg (1 lb)

Dimensions

2.6 cm H x 20.8 cm W x 34.7 cm D
(1.0 in. H x 8.2 in. W x 13.7 in. D)

«
...
67
68
69
70
71
...
»

Summary of Contents for 4007













































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments