3Com 4007, Implementation Manual, Page: 127 / 684

Displaying Operating Conditions 127
Displaying Module
Information
Use the
show module
commands to display status information for a
module and submodule that is installed in a specific slot or to display
information for
all modules and submodules that are installed in the
chassis.
The following
show module
commands are available:
■
show module <slot.subslot>
■
show module all
■
show module all verbose
The subslot number is always 1.
Basic Information For One Module
To display basic information for a module installed in a specific slot, use
the following command syntax:
show module <slot.subslot>
Where
<slot.subslot>
is the location of the module in the chassis. The
following example displays basic information for the EME installed in
slot 17, subslot 1 in a 16-slot chassis:
CB9000> show module 17.1
Slot Module Status Description
----- ------ ------ --------------------------------
17.01 3CB9EME Active Enterprise Management Controller
Basic Information For All Modules
To display basic information for all installed modules, use the
show
module all
command.
Detailed Information For All Modules
To display detailed information about all of the modules that are installed
in your chassis, including information about module software and DIP
switch settings, use the
show module all verbose
command.