3Com 4007, Implementation Manual, Page: 318 / 684

318 C
HAPTER
15: P
ACKET
F
ILTERING
Loading a Custom
Filter on the
Switch 4007
Here are step-by-step directions to load the filter on an EME, and then to
load and assign filters on the Multilayer Switching Module:
1 Log in to a Switch 4007.
2 At the EME’s prompt, enter a
download
command using the following
syntax:
download module <slot.subslot> filter <IP address>
<filterfilename>
For example:
CB9000>download module 6.1 filter 159.101.69.20 rejfddiat.fil
File transfer request pending.
Downloading file from external file server to eme - 000000289
Downloading file from eme to module 6.1 - 000000289
File transfer completed successfully.
The predefined filters that come with Filter Builder are found in the
/3Com/Filterbuilder/Filters directory, which is the default directory for
Filter Builder when installed from WebManage.exe.
3 Connect to the module:
For example:
CB9000> connect 6.1
4 At the module prompt, load the filter:
For example:
CB9000@slot6.1 [12-E/FEN-TX-L3] (): bridge packetFilter load
Packet filter 1 stored.
5 Verify that the filter has been loaded:
For example:
CB9000@slot6.1 [12-E/FEN-TX-L3] (): bridge packetFilter list
Packet Filter 1 - rejFddiat
No port assignments
6 At the module prompt, enter
bridge packetFilter assign
to assign
filters to port(s).