3Com 4007, Implementation Manual, Page: 627 / 684

SNMP 627
Table 96 Traps Supported by SNMP
Trap
No.
Trap Name Source Indication
1 Cold Start MIB II The agent has started or been restarted.
2 Link Down MIB II The status of an attached
communication interface has changed
from
up to down .
3 Link Up MIB II The status of an attached
communication interface has changed
from
down to up .
4 Authentication
Failure MIB II The agent received a request from an
unauthorized manager.
5 New Root Bridge MIB The sending agent has become the new
root of the Spanning Tree.
6 Topology
Change Bridge MIB Any of bridge configured ports
transitions from the Learning state to
the Forwarding state, or from the
Forwarding state to the Blocking state.
7 System
Overtemperature 3C System MIB The system temperature exceeds a
certain threshold.
8 Power Supply
Failure 3C System MIB The trap that is generated when a
power supply unit fails in a system with
a dual power supply.
13 Address
Threshold 3C System MIB The number of addresses stored in the
bridge reaches a certain threshold.
14 System Fan
Failure 3C System MIB One of the system fans fails.
15 SMT Hold
Condition 3C FDDI MIB FDDI SMT state either in holding-prm or
holding-sec.
16 SMP Peer Wrap
Condition 3C FDDI MIB FDDI SMT connection does not connect
to an M-port under DAS mode.
17 MAC Duplicate
Address
Condition 3C FDDI MIB A status there are more than one MAC
address.
18 MAC Frame Error
Condition 3C FDDI MIB A status the error frames rate reaches a
certain threshold.
19 MAC Not Copied
Condition 3C FDDI MIB A status the not copied frames rate
reaches a certain threshold.
20 MAC Neighbor
Change 3C FDDI MIB A change in a MAC's upstream
neighbor address or downstream
neighbor address.
21 MAC Path
Change 3C FDDI MIB A status that the FDDI Path changes.