3Com 4007 Implementation Manual Download Page 388

Page: 388 / 684

388

HAPTER

16: IP R

OUTING

RIP Import Policy Conditions for Specified Interfaces

Table 75 lists the policy conditions for RIP import policies:

Table 75

RIP Import Policy Conditions

Source
Router

Route
(address/mask) Action

Description

Specified
router

Specified
route/mask

Accept specified route from specified
source router on specified interfaces
with or without metric adjustments
(+, -, *, /, %).

Specified
router

all (0.0.0.0)

Accept all routes from specified
router on specified interfaces with or
without metric adjustments (+, -, *, /,
%).

all (all
routers)

Specified
route/mask

Accept specified route on specified
interfaces with or without metric
adjustments (+, -, *, /, %).

all

Accept all routes on specified
interfaces with or without metric
adjustments (+, -, *, /, %).

Specified
router

Specified
route/mask

reject

Reject specified route from specified
router on specified interfaces.
(Metrics do not apply because the
route itself is rejected.)

Specified
router

all

reject

Reject all routes from specified router
on specified interfaces.

all

Specified
route/mask

reject

Reject specified route from all routers
on specified interfaces.

all

reject

Reject all routes on specified
interfaces.

Summary of Contents for 4007













































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 4007

Reviews:

3Com 4007, Implementation Manual, Page: 388 / 684

Search results

Summary of Contents for 4007

Reviews: