3Com 3036, Configuration Manual

Page: 65 / 762

Dumb Terminal Service 61
By default, no dumb terminal service is configured.
2 Configure
auto-execute command
command
If the
auto-execute command
command is configured on the asynchronous serial
interface, when you press Enter twice on the external terminal connected to the
interface or log onto the router in modem dial-up mode and press Enter twice, the
router will automatically execute the operation preset by the
auto-execute
command
command.
If the router is configured with the
auto-execute command
command, you will
not be allowed to log into the configuration interface of the router. If the
command cannot be executed, you will return to the interface with the prompt
Press ENTER to get started
, and after you press Enter , the command will be
executed.
Please perform the following configurations in asynchronous serial interface view.
Table 44 Configure
auto-execute command
command
By default, the
auto-execute command
command is not configured.
Configuration Examples
of Dumb Terminal
Service
Configure Dumb Terminal
■
The configuration procedure of the dumb terminal on sync/async serial 0 ports
is as follows:
[Router-Serial0] physical-mode async
[Router-Serial0] undo modem
[Router-Serial0] async mode flow
■
The configuration procedure of the dumb terminal on 8/16 async serial 0 port
is as follows:
[Router-Async0] undo modem
[Router-Async0] async mode flow
■
The configuration procedure of the dumb terminal on AUX port is as follows:
[Router-Aux0] undo modem
After the above operation,
Press ENTER to get started
displays on the terminal
connected to this async interface, press Enter twice to enter the router
configuration interface. During the configuration, you can click logout to exit the
command line interface and can also click Enter twice to return.
Configure Auto-execute command
The user can use the Telnet command specified by the
auto-execute
command to
log on the remote SCO UNIX workstation after establishing the connection with
the Router via the dumb terminal.
Configure the synchronous/asynchronous serial work in
asynchronous mode
physical-mode async
Configure the serial interface of the router to be in flow
mode
async mode flow
Forbid modem to dial in or dial out
undo modem
Operation Command
Configure the
auto-execute command
command on the asynchronous serial interface
auto-execute command command
Remove this command
undo auto-execute command
command