3Com 3036, Configuration Manual

Page: 562 / 762

558 C
HAPTER
39: C
ONFIGURING
F
IREWALL
Table 627 Configure Rules for Applying Access Control List on Interface
By default no rule for filtering messages on interface is specified.
In one direction of an interface (
inbound
or
outbound
), up to 20 access rules can
be applied. That is to say, 20 rules can be applied in
firewall packet-filter
inbound
, and 20 rules can be applied in
firewall packet-filter outbound
.
If two rules with different sequence numbers conflict, then the number with
greater
acl-number should be matched preferentially.
Specifying Logging Host Firewall supports a logging function. When an access rule is matched, and if the
user has specified to generate logging for this rule, logs can be sent to and
recorded and saved by the logging host.
Perform the following configurations in system view.
Table 628 Specify Logging Host
For detailed description logging host parameters, see “Logging Function” in
“System Management”.
Displaying and
Debugging Firewall
Use
debugging
,
reset
and
display
commands in all views.
Table 629 Display and Debug Firewall
Firewall Configuration
Example
The following is a sample firewall configuration in an enterprise.
This enterprise accesses the Internet through interface Serial 0 of one 3Com
router, and the enterprise provides www, FTP and Telnet services to the outside.
The internal sub-network of the enterprise is 129.38.1.0, the internal ftp server
address 129.38.1.1, internal Telnet server address 129.38.1.2, and the internal
Operation Command
Specify rule for filtering receive/send
messages on interface
firewall packet-filter acl-number [
inbound | outbound ]]
Cancel rule for filtering receive/send
messages on interface
undo firewall packet-filter
acl-number [ inbound | outbound ]]
Operation Command
Specify logging host
ip host unix-hostname ip-address
Cancel logging host
undo ip host
Operation Command
Display firewall status
display firewall
Display packet filtering rule and its
application on interface
display acl [ all | acl-number |
interface type number ]
Display current timerange
display timerange
Display whether the current time is within
special timerange
display isintr
Clear access rule counters
reset acl counters [ acl-number ]
Enable the information debugging of
firewall packet filtering
debugging filter { all | icmp | tcp |
udp
}