2N® LiftIP 2.0 User Manual
97
/
119
•
•
•
•
•
•
•
•
•
At Boot Time
– enable check and, if possible, update execution upon every device start.
Update Period
– set the update period. Set an automatic update to take place hourly/
daily/weekly/monthly, or set the period manually.
Update At
– set the update time in the HH:MM format for periodical updating. Thus, you
can set that the update shall take place at a low-traffic time. The parameter is not applied
if the update period is set to a value shorter than 1 day.
Next Update At
– display the next update time.
Last Update At
– display the last update time.
Update Result (Common Config)
– display the last common update result. The following
options are available: DHCP option 66 failed, Firmware is up to date, Server connection
failed, Running..., File not found.
Communication Result Detail (Common configuration)
– server communication error
code or TFTP/HTTP status code.
Update Result (Private Config)
–
private configuration follows the common
configuration update. A device with private configuration is identified by the MAC
address. The result of the last private update is displayed.
The following options are
available: DHCP option 66 failed, Firmware is up to date, Server connection failed,
Running..., File not found.
Communication Result Detail (Private configuration)
– server communication error
code or TFTP/HTTP status code.
