manualshive.com logo in svg

2N LiftIP 2.0, User Manual

Share
Download
2N LiftIP 2.0 User Manual Download Page 101

2N® LiftIP 2.0 User Manual

101

 /  

119

•

•

•

Upgrade Firmware

 – upload a new firmware version to the device. Press the button to 

display a dialog box to select the proper firmware file. Once the firmware is uploaded, the 
device is restarted automatically. After the restart, it becomes fully operational with a new 
firmware version. The whole upgrading process takes less than one minute. Download the 
current firmware version for your device from 

www.2n.com

. FW upgrade does not affect 

configuration. The device checks the firmware file and prevents you from uploading an 
incorrect or corrupt file.

Check Now

 – check online if a later firmware version is available. If so, the downloading 

option is offered followed by automatic upgrade.

Restart

 

Device

 – restart the device. The process takes about 30 s. Once the restart is 

completed and the device is assigned its IP address, the login window will be displayed 
automatically.

Summary of Contents for LiftIP 2.0
























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands