2N® LiftIP 2.0 User Manual
108
/
119
Situation
2N
®
LiftIP 2.0
DTMF character
Confirms the connection (“Connection
confirmed"), mutes the announcement played
and the call takes the maximum preset time
(Maximum call time).
These digits are interpreted as control characters.
Confirmation by Off-Hook
VOIP
The called user does not have to press any button. Both the modes share a set of numbers and
cycle counts and respond identically to situations during dialing.
CPC (Antenna and KONE)
Used wherever the counterparty is equipped with the required SW. When the line is answered, a
DTMF string is sent. The lift identifies itself. The call is either switched to voice communication
(alarm call) or confirmed automatically and terminated (checking call).
P100
Used wherever the counterparty is equipped with the required SW. When the line is answered, a
DTMF character is sent. The lift identifies itself. The call is either switched to voice
communication (alarm call) or confirmed automatically and terminated (checking call).
DTMF Protocol Auto Detection (CPC/P100)
When the DTMF string is sent, the lift identifies the protocol and responds accordingly.
•
The call is confirmed after the voice message is played.
•
Warning
Make sure before using this mode that no VoiceMail box, fax machine or any other
device that could answer the call before the preset ring count is installed on any of
the numbers to be called. This would lead to automatic dialing termination.
