2N® LiftIP 2.0 User Manual
58
/
119
•
•
•
•
•
•
•
Use Authentication ID
– enable the use of an alternative ID for device authentication. If
disabled, the Phone number defined above is used for authentication.
Authentication ID
– set an alternative user ID for device authentication.
Password
– set a password for device authentication. If your PBX requires no
authentication, the parameter will not be applied.
Proxy Address
– set the SIP Proxy IP address or domain name.
Proxy Port
– set the SIP Proxy port.
The device uses the default port according to the
transport layer (5060 or 5061) or the port obtained from the DNS in case the parameter is
empty or set to 0.
Backup Proxy Address
– set the backup SIP Proxy IP address or domain name. The
address is used where the main Proxy fails to respond to requests.
Backup Proxy Port
– set the backup SIP Proxy port.
The device uses the default port
according to the transport layer (5060 or 5061) or the port obtained from the DNS in case
the parameter is empty or set to 0.
