2N® LiftIP 2.0 User Manual
39
/
119
Technical Parameters
Output
Maximum switching
power
15 W
Maximum switching
voltage
30 V
Maximum switching
current
2 A
•
Note
The relay output error state is signaled in the same way as if the device was
disconnected from the power supply. The relay output is without voltage.
•
•
•
•
Warning
Disconnect
2N
®
LiftIP 2.0
from the power supply (10–30 V DC or PoE) while
connecting 2N
®
LiftIP 2.0 Relay extender.
To protect the circuits against short circuit with other conductive objects,
put
2N
®
LiftIP 2.0 Relay extender
into an insulation tube and secure it with cable ties
before installation!
Keep the proper connection (yellow wire).
A wrong connection may damage the module.
