2N® LiftIP 2.0 User Manual
59
/
119
•
•
•
•
•
•
•
•
Registration Enable
– enable registration with the set SIP Registrar.
Registrar Address
– set the SIP Registrar IP address or domain name.
Registrar Port
– set the SIP Registrar port.
The device uses the default port according to
the transport layer (5060 or 5061) or the port obtained from the DNS in case the parameter
is empty or set to 0.
Backup Registrar Address
– set the backup SIP Registrar IP address or domain name. The
address is used where the main Registrar fails to respond to requests.
Backup Registrar Port
– set the backup SIP Registrar port.
The device uses the default
port according to the transport layer (5060 or 5061) or the port obtained from the DNS in
case the parameter is empty or set to 0.
Registration Expiry
– set the registration expiry, which affects the network and SIP
Registrar load by periodically sent registration requests. The SIP Registrar can alter the
value without letting you know.
Registration State
– display the current registration state (Unregistered, Registering...,
Registered, Unregistering...).
Failure Reason
– display the reason for the last registration attempt failure: the registrar’s
last error reply, e.g. 404 Not Found.
