2N® LiftIP 2.0 User Manual
94
/
119
•
•
•
•
•
•
•
At Boot Time
– enable check and, if possible, update execution upon every device start.
Update Period
– set the update period. Set an automatic update to take place hourly/
daily/weekly/monthly, or set the period manually.
Update At
– set the update time in the HH:MM format for periodical updating. Thus, you
can set that the update shall take place at a low-traffic time. The parameter is not applied
if the update period is set to a value shorter than 1 day.
Next Update At
– set the next update time.
Last Update At
– display the last update time.
Update Result
– display the last update result. The following options are available: DHCP
option 66 failed, Firmware is up to date, Server connection failed, Running..., File not
found.
Communication Result Detail
– server communication error code or TFTP/HTTP status
code.
Result
Description
Invalid server
address
The server address is invalid.
Unsupported
protocol
The protocol is not supported. HTTP(s) and TFTP are supported only.
•
Info
The device contains Factory Cert, a signed certificate used for British Telecom
integration, for example.
