2N® LiftIP 2.0 User Manual
80
/
119
•
•
•
•
•
•
Ringtone Volume
–
set the incoming call ringtone volume.
Call-Progress Tone Volume
–
set the dialtone, ringtone and busy tone volume levels. In
case the call progress tones are automatically generated by the PBX, this setting will not
be applied.
Warning Tone Volume
–
set the volume of warning and signaling tones described in the
Signaling of Operational Statuses section. The volume values are relative against the set
master volume.
Suppress Warning Tones
– the following operational statuses will not be signaled:
Internal application started, IP address received and IP address lost.
User Sound Volume
–
set the volume of the user sounds to be played. The volume values
are relative against the set master volume.
Microphone Input Gain
–
set the microphone input gain.
4.4.2 Input Inversion
Input Inversion enables you
to set the input response to the pulse rising / falling edge (press /
release the button).
