2N LiftIP 2.0, User Manual

Page: 45 / 119

2N® LiftIP 2.0 User Manual
45 / 119
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The Start Screen is the first menu level and provides quick navigation (click any tile) into
selected parts of the device configuration. Some tiles also display the state of selected services.
Configuration Menu
The 2N
®
LiftIP 2.0 configuration is divided into 5 main menus – State , Directory , Services ,
Hardware and System – and their submenus, refer to the list below.
State
Lift – display basic information on the lift / lift communicator and its error states.
Device – display basic information on 2N
®
LiftIP 2.0 .
Services – display the states of the network interface and selected services .
Events – display the last 500 events recorded by the device.
Directory
Users – set the directory destination phone numbers.
Services
Lift – set the lift identification.
Phone – set the phone and SIP connection.
User Sounds – set and record user sounds.
Rescue Mode – set the rescue mode.
Alarm Call – set the alarm call.
Checking Call – set the checking call.
Notifications – set the event notifications.
Web Server – set the web server and access password.
Audio Test – set the automatic audio test.
Hardware
Audio – set the audio, signaling, etc. volume control, microphone parameters
Input Polarity – set the button and input polarities.
External Camera – set the external IP camera.
System
Network – set the LAN connection, 802.1x, packet capturing
Date and Time – set the real time and time zone.
License – set the licenses, activate the trial license.
Certificates – set the certificates and private keys.
Update – set the automatic firmware and configuration updates.
Syslog – set syslog message sending.