2N® LiftIP 2.0 User Manual
68
/
119
•
•
•
•
4.3.4 Rescue Mode
The rescue mode is activated after the alarm call is completed. Set the rescue ending method
too while enabling the rescue mode.
Enable Rescue Mode
– enable the rescue mode (if enabled, the rescue mode requires one
of the rescue ending methods to be set).
By ALARM2 Button
– set that the rescue mode can be ended by pressing the ALARM2
button.
By Password
– set that the rescue mode can be ended using a password (sent to the
device as DTMF in a call).
Password
– set the rescue ending password. The password is sent to the device as DTMF
into a call and may contain digits only (up to 16).
•
Note
The sound recording function is not available on browsers that fail to support the
WebRTC standard.
