2N® LiftIP 2.0 User Manual
72
/
119
•
•
•
•
•
Period
– the checking calls are repeated once in the defined count of days. The first
checking call is made at a randomly selected time during the first 24 hours after the device
startup.
Next Call
– display the next periodical checking call date and time.
1–2
–
select the user to which the connection will be directed.
Repetition Count
–
set the count of calling cycles if a call is not confirmed.
Test Checking Call
–
display a dialog box to make a test call to
the destinations as
defined. The whole cycle repeats as set until a call is confirmed. The test does not affect
the checking call period and repetition settings.
•
Note
The periodical checking call cycle is initiated at a randomly selected time after the
device startup, then the set intervals are kept.
•
•
Caution
If there is an audio or button error, the checking call is not made despite an active
date and time value of the checking call period. This means that no alarm call can
be made and the control center cannot be contacted, and so an intervention of a
lift service technician is required.
If the call routing destination is not completed, the checking call cannot be made
even though the function is enabled.
