ZyXEL Communications MAX-306, Руководство пользователя, Страница: 168 / 405

Chapter 13 The Phone Screens
User’s Guide
168
13.2.1 Advanced Analog Phone Setup
Click the Advanced button in VOICE > Phone > Analog Phone to edit
advanced settings for each phone port.
Figure 78 VOICE > Phone > Analog Phone > Advanced
The following table describes the labels in this screen.
Table 62 VOICE > Phone > Analog Phone > Advanced
LABEL DESCRIPTION
Voice Volume Control
Speaking
Volume
Enter the loudness that the WiMAX Device uses for speech that it sends
to the peer device. -1 is the quietest, and 1 is the loudest.
Listening
Volume Enter the loudness that the WiMAX Device uses for speech that it
receives from the peer device. -1 is the quietest, and 1 is the loudest.
Echo Cancellation
G.168 Active
Select this if you want to eliminate the echo caused by the sound of
your voice reverberating in the telephone receiver while you talk.
Dialing Interval Select
Dialing Interval
Select
Enter the number of seconds the WiMAX Device should wait after you
stop dialing numbers before it makes the phone call. The value depends
on how quickly you dial phone numbers.
If you select Active Immediate Dial in VOICE > Phone > Common,
you can press the pound key (#) to tell the WiMAX Device to make the
phone call immediately, regardless of this setting.
VAD Support Select this if the WiMAX Device should stop transmitting when you are
not speaking. This reduces the bandwidth the WiMAX Device uses.
Note: The G.711 codec does not support this feature.