Ziton ZP1-F2, Руководство по установке

Страница: 84 / 113

Chapter 5: Technical specifications
78 ZP1-F Series Installation Manual
Zone specifications
Table 31: General zone specifications
Zone circuit output voltage
Nominal
Maximum
Minimum
22 VDC
24 VDC
18 VDC
Maximum current consumption per zone circuit 65 mA
Default zone circuit configuration
EN 54
NEN 2535
NBN S 21-100
BS 5839-1
Passive end-of-line
Passive end-of-line
Passive end-of-line
Active end-of-line
Zone circuit termination
EN 54
NEN 2535
NBN S 21-100
BS 5839-1
EN 54-13 supervision enabled
Intrinsically safe
4.7 kΩ end -of-line resistor
4.7 kΩ end -of-line resistor
4.7 kΩ end -of-line resistor
Active end-of-line device
EOL-Z end-of-line device
4.7 kΩ end -of-line resistor
Number of detectors per zone circuit
Ziton Z600 series
EST E6 series
Other detectors [1]
32 max. [2]
32 max. [2]
32 max. [2][3]
Number of manual call points per zone circuit 32 max. [4]
[1] Systems using other detectors are not EN 54-13 compliant.
[2] Or as defined by local standards. Maximum of 30 detectors for NBN S 21-100 installations.
[3] Provided that the detectors meet the required zone specifications given here.
[4] Figures based on EN 54-2. The maximum number of devices may differ for other standards.
For example, NBN S 21-100 indicates a maximum of 30 detectors or 10 manual call points per
zone circuit.
Table 32: Mixed zone specifications [1]
Max. resistance per zone circuit 40 Ω
Max. capacitance per zone circuit 500 nF
Nominal impedance
Detector
Manual call point
160 Ω to 680 Ω
±
5%
100 Ω
±
5%
Detector alarm reference range
Zone voltage
Zone impedance
6.5 V to 14 V
145 Ω to 680 Ω
Manual call point alarm reference range
Zone voltage
Zone impedance
3 V to 6.5 V
75 Ω to 144 Ω