19
STRIPE = NEGATIVE = SHORTER LEAD = ROUND PAD
NO STRIPE = POSITIVE = LONGER LEAD = SQUARE PAD
Make sure you orient these caps properly! For reference, Figure 4 on page 11 has little
red plus signs (+) on the positive pads.
i. Install C4 in its place and bend the leads out (35).
ii. Install C15 in its place and bend the leads out (36)
35
36
iii. Install C14 in its place and bend the leads out (37)
37
iv. Flip the board over, solder (38a) and snip all the capacitors’ leads (38b).
38a
38b
