13
a. Start with the 1K resistors (R4, R5, R6, R11, R12, R15), marked BROWN, BLACK, BLACK,
BROWN, BROWN. Compare to its picture in the BOM. Find their locations on the circuit
board; install and bend the leads out on the solder side as described above (3,4,5,6). Don’t
solder any of them until all 24 resistors are installed.
3
4
5
6
b. Install the 10K resistors (R2, R3, R13, R14, R16). These resistors are marked BROWN,
BLACK, BLACK, RED, BROWN (7). R13 and R14 stand upright on the PCB so bend one
lead nearly parallel with their bodies (8) and install them standing up (9,10). Bend the leads
out on the back so they won’t fall out.
7
8
9
10
