34
c. Bend the leads out on the component side of the board. Solder and clip the leads.
d. Repeat with the other red 3mm LED at the BYPASS LED location, and with the green 3mm
LED at the TAP LED location (119,120).
119
120
18. Ground Lug: The ground lug electrically connects the chassis to the circuit ground.
a. Solder the single remaining wire to the ground lug tab. Bend a little hook in the wire with
your pliers and hook it to the tab hole (121). Use your pliers to crimp it down on the tab
(122) and then solder it in place (123).
b. Bend the end of the tab down as in the picture (124).
121
122
123
124
