Zennio ZN1VI-TP41C Скачать руководство пользователя страница 86

Страница: 86 / 94

InZennio Z41

http://www.zennio.com

Tecnical Support:

http://support.zennio.com

Alarm activation

: a box that has been assigned the Alarm function has either

received the alarm trigger value from the KNX bus, or exceeded the cyclical

monitoring period.

Alarm confirmation

: a box with an active alarm has been acknowledged by

the user.

Alarm deactivation

: a box that has already been acknowledged by the user

has also received the no-alarm trigger value. Therefore, the alarm has been

deactivated and acknowledged.

The above notifications are shown on the mobile device (unless “push” notifications are

disabled by the operating system of the device, depending on the user settings)

through messages similar to the following figure, and according to the label assigned to

the involved alarm box:

Figure 91

Push Notification

Notes

:€

In case of network unavailability, Z41 will queue all notifications related to the

alarm events that may take place and will send them as soon as the network

is available.

Queued (unsent) notifications are discarded on external power failures, but

not on KNX bus power failures.

In the unlikely event of a very long network failure, the queue may become

out of space, and therefore further notifications will not be queued.

Zennio Avance y Tecnología S.L. does not accept any responsibility for

losses of “push” messages due to network, hardware or software failures of

any kind

Содержание ZN1VI-TP41C































































































Результаты поиска

Содержание ZN1VI-TP41C

Отзывы:

Похожие инструкции для ZN1VI-TP41C

Бренды по названию

Популярные бренды

Zennio ZN1VI-TP41C, Руководство пользователя

Результаты поиска

Содержание ZN1VI-TP41C

Отзывы:

Похожие инструкции для ZN1VI-TP41C

Бренды по названию

Популярные бренды