Zennio ZN1VI-TP41C Скачать руководство пользователя страница 29

Страница: 29 / 94

InZennio Z41

http://www.zennio.com

Tecnical Support:

http://support.zennio.com



Label for “Repeat password”

: message shown when the user is required

to re-type the new password. By default, “Repeat password”.



Label for “Updated”

: message shown to the user as a confirmation of the

password change. By default, “Updated”.

Buttons that lead to a protected page from the Menu page (see section 2.1) will show a

little lock icon overlaid on their lower left corner.

3.2.3

TOUCH LOCK

Figure 18

Touch Lock (Main Configuration)

This screen is provided for the configuration of the “welcome” and “touch lock” objects.

By default two parameters are shown:

Touch Locking

: dropdown list with the following options: “0=Touch enabled;

1=Touch disabled” (default value) and “0=Touch disabled; 1=Touch enabled”.

Depending on the selection, sending one value or another (“0” or “1”) to

object

[General] Touch lock

will lock/unlock the touch panel. The detailed

behaviour of this object is described in section 3.1.

Welcome Object

: dropdown list with the following options: “Disabled” (default

value), “1-bit object” and “Scene”.



If “Disabled” is selected, this functionality will remain inactive. Therefore,

nothing will happen when, after a certain standby period, the user resumes

the interaction with the touch panel.



If “1-bit object” is selected, the

[General] Welcome Object

binary object is

enabled and two more parameters turn visible:

•

Value

: value (“0” or “1”) that will be sent to the bus. By default it is “1”.

Содержание ZN1VI-TP41C































































































Результаты поиска

Содержание ZN1VI-TP41C

Отзывы:

Похожие инструкции для ZN1VI-TP41C

Бренды по названию

Популярные бренды

Zennio ZN1VI-TP41C, Руководство пользователя

Результаты поиска

Содержание ZN1VI-TP41C

Отзывы:

Похожие инструкции для ZN1VI-TP41C

Бренды по названию

Популярные бренды