InZennio Z41
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
32
3.2.5
ETHERNET
Figure 22
Ethernet (Main Configuration)
The Ethernet tab permits configuring the Ethernet network interface of Z41.
Therefore, from this parameter screen, it is possible to specifically enable the remote
control function (see ANNEX I. Controlling Z41 Remotely via ) by marking the
Remote
Control through the Internet
checkbox.
On the other hand, this window lets the integrator give a name to the device (
Device
Description
), so that it turns easier to identify it from the “Z41 Update” desktop
application (which may detect other Z41 devices on the same local network), provided
for performing firmware updates on Z41 through the Ethernet interface.
Finally, the
IP Address Assignment
parameter is reserved for future use, as Z41 is
currently only compatible with the automatic IP assignment through the DHCP protocol.
The Ethernet interface in Z41 is also intended to let the integrator update the firmware
of the device (see section 1.3.1) across a local network (alternatively, this process can
be performed through the built-in USB interface). Note, however, that the parameters
related to the firmware update (either via USB or via Ethernet) can be found in the
Firmware Update
tab (see section 3.2.9).
