InZennio Z41
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
26
letters or numbers) should be entered, so each of the characters will
represent one weekday. The default value is “MTWTFSS”, according to the
initial letters of the day names in English.
Label for “Time ON”
: field that permits customising the label that will be
shown within the configuration pages of the weekly timers (see epigraph e) in
section 3.4.2.5), next to the checkbox that enables/disables the sending of
the switch-on order. The default value is “Time ON”.
Label for “Time OFF”
: field that permits customising the label that will be
shown within the configuration pages of the weekly timers (see epigraph e) in
section 3.4.2.5), next to the checkbox that enables/disables the sending of
the switch-off order. The default value is “Time OFF”.
Label for “Scene”
: field that permits customising the label that will be shown
within the configuration pages of the weekly timers (see epigraph e) in section
3.4.2.5), next to the checkbox that enables/disables the sending of scenes.
The default value is Scene”.
3.2.2
SECURITY
Figure 15
Security (Main Configuration)
This screen permits selecting how many security levels (one or two) will be available
for the configuration of the access to the control pages. In other words, it permits
setting one or two different passwords, so the integrator can afterwards configure
