InZennio Z41
http://www.zennio.com
Tecnical Support:
http://support.zennio.com
83
ANNEX I. CONTROLLING Z41 REMOTELY VIA IP
Versions 3.x and later of the Z41 application program feature an IP communication
mechanism that makes it possible to perform actions over the device and to control its
functions remotely by means of specific applications that communicate with Z41
through IP networks, in an equivalent manner as if the device were actually being
controlled on site.
CONFIGURING Z41
In order to make the Z41 control function available for remote applications, it is
necessary that the integrator specifically enables it in ETS through the
Remote
Control through the Internet
parameter from the “Ethernet” window, under the “Main
Configuration” tab (see section 3.2.5).
Figure 89
Configuration page with Device Paring enabled.
In addition, before being possible to remotely control Z41, it is first necessary to pair it
to the remote application. This requires that the integrator also enables the
Device
Pairing
parameter in the “Configuration” window, under the “Configuration Page” tab
(see section 2.4). After that, Z41 will include a new icon into its Configuration page (as
in Figure 89), which lets the final user start the pairing process.
The icon of the pairing function contains, on the upper left corner, a service state
indicator. This indicator will automatically update if the state changes.
