KLIC-LG1
http://www.zennio.com
Technical Support:
http://support.zennio.com
17
Simplified Mode
:
in addition to the “
Mode
” and “
Mode (Status)
” 1-Byte
objects, available by default, it is possible to commute and to verify the current
operation mode through the following 1-Bit objects, which get enabled after
activating this parameter:
“
Simplified Mode
”, which allows switching to the Cooling mode when
receiving
a “0” and to the Heating mode when receiving a “1”.
“
Simplified Mode (Status)
”, which will send the value “0” when the
mode switches to Cooling or to Dry, or the
value “1” when it switches to
Heating. The Fan mode is not reflected in the value of this object.
FAN
Fan
:
enables the Fan function. See section 2.4.2.
Flaps
:
enables the fan Flaps function. See section 2.4.3.
REFERENCE TEMPERATURE
Figure 10: A/C Gateway. Configuration. Reference Temperature.
External Reference Temperature Object
:
enables the
“
[AC] External
Reference Temperature
” 2-Byte object, which provides the value of an
external temperature sensor, which is used by the AC machine as the
reference to execute the control loop.
Note
:
this option is only available if the KLIC is configured as master.
Figure 9: A/C Gateway. Configuration. Fan.
C
