KLIC-LG1
http://www.zennio.com
Technical Support:
http://support.zennio.com
13
2.4
A/C GATEWAY
2.4.1
CONFIGURATION
KLIC-LG1 allows controlling and monitoring an air-conditioning unit in the same way it
would be through the wired remote control it is provided with.
Through the KNX bus, KLIC-LG1 can be sent orders to control the following basic
functions of the air conditioning unit:
Control configuration
, which allows establishing the type of master-slave
control desired to KLIC-LG1.
On/Off
switch of the air-conditioning unit.
Note:
if the A/C unit is off, the received orders will be ignored
.
Operation mode
: automatic, heating, cooling, fan and dry.
Note:
due to intrinsic LG restriction
s,
in “Fan” and “Dry” modes, it is not
possible to change the setpoint.
Temperature setpoint
, which
can be modified
within a specific range of
values, depending on the capabilities of the specific A/C unit being controlled.
External reference temperature
which purpose is to receive temperature
values provided by an external temperature probe to perform the temperature
control.
Fan speed
: 3 or 4, depending on the model of the A/C unit.
Control of flaps (or vanes) positioning
: step control, direct positioning, swing
and swirl movement of horizontal and vertical flaps, depending on the A/C unit.
Moreover, KLIC-LG1 allows configuring several advanced functions:
Initial configuration
, which allows establishing the desired initial parameters
for the state of the A/C unit after programming or restarting the device.
Setpoint limits
,
to restrict the range for the temperature setpoint.
