Zennio KLIC-LG1, Руководство пользователя

Страница: 27 / 35

KLIC-LG1
http://www.zennio.com Technical Support: http://support.zennio.com
27
Note:
in case of choosing “Off”, it won’t be possible to change the remaining
parameters.
Mode :
“No change”, “Heating”, “Dry”, “Cooling”, “Fan” or “Automatic”.
Fan Speed :
“No change”, “Automatic” (if available) or any of the available fan
speeds (1-4).
Horizontal Flaps :
“Last”, “Swing”, “Swirl” or any of the available flap positions
(1-6) (depending on A/C unit functions and the established configuration)..
Vertical Flaps :
“Last”, “Swing On” or “Swing Off” (depending on A/C unit
functions and the established configuration).
Setpoint :
“Last” or any value between 10ºC and 32ºC.
Note : this initial setpoint value may be modified by the setpoint limits during
runtime .
2.4.6 ERROR HANDLING
KLIC-LG1 is capable of managing two error types:
Communication (or internal) errors : errors in the communication process
between KLIC-LG1 and the A/C unit:

Control error : KLIC-LG1 is not able to establish communication with the
A/C machine.

Communication error : KLIC-LG1 received no response after sending a
request to the A/C unit.
There is a LED notification, by which the LED on the device will light green
when this error is active.
Errors in the A/C unit : errors reported by the A/C unit itself. KLIC-LG1 can
notify the KNX bus about the reported error code, although referring to the
specific documentation of the A/C machine is advisable in order to obtain
further information.