KLIC-LG1
http://www.zennio.com
Technical Support:
http://support.zennio.com
10
2.2
INPUTS
KLIC-LG1 incorporates
three analogue/digital inputs
, each configurable as a:
Binary Input
, for the connection of a pushbutton or a switch/sensor.
Temperature Probe
, for the connection of a temperature sensor from Zennio.
Motion Detector
, for the connection of a motion detector (models ZN1IO-
DETEC-P and ZN1IO-DETEC-X from Zennio).
Important:
older models of the Zennio motion detector (e.g., ZN1IO-DETEC
and ZN1IO-DETEC-N) will not work properly with KLIC-LG1
.
ETS PARAMETERISATION
When
Inputs
has been activated in the General parameters screen, the following drop-
down lists will be available for the selection of the specific functions required.
Figure 5. Inputs. Configuration.
All inputs are disabled by default. Depending on the function selected for each input,
additional tabs will be included in the menu on the left.
2.2.1
BINARY INPUT
Please refer to the “
Binary Inputs
” user manual, available in the KLIC-LG1 product
section, at the Zennio website (
www.zennio.com
).
