KLIC-LG1
http://www.zennio.com
Technical Support:
http://support.zennio.com
11
2.2.2
TEMPERATURE PROBE
Please refer to the “
Temperature Probe
” user manual, available in the KLIC-LG1
product section, at the Zennio website (
www.zennio.com
).
2.2.3
MOTION DETECTOR
It is possible to connect motion detectors (models
ZN1IO-DETEC-P
and
ZN1IO-DETEC-
X
from Zennio) to the input ports of KLIC-LG1.
Please refer to the “
Motion Detector
” user manual, available in the KLIC-LG1 product
section, at the Zennio website (
www.zennio.com
).
Notes
:
The ZN1IO-DETEC-P motion detector is compatible with a variety of Zennio
devices. However, depending on the device it is actually being connected to,
the functionality may differ slightly. Therefore, please refer specifically to the
corresponding product section to obtain the aforementioned document.
Motion detectors with references ZN1IO-DETEC and ZN1IO-DETEC-N
are
not compatible
with KLIC-LG1 (may report inaccurate measurements if
connected to this device).
When connected to KLIC-LG1, the rear micro-switch of model ZN1IO-DETEC-
P should be set to position
“
Type B
”.
