Zenith Z-100 Series, Руководство пользователя

Страница: 56 / 150

Page 55
WINCHESTER SUPPLEMENT
for 5-1/4" disks, or
BACKUP E; ~. ~ C: BACK1 /F/V
for 8" disks.
The E designates the first Winchester disk Z-DOS partition.
If you want to back up the second Z-DOS partition, replace
the E with F. The wild card s.+ indicates "copy all
files," and the A:BACK1 is the "single" file name mentioned
earlier. If you are using 8" disks, substitute the A with C. The
/F switch is used to automatically format the floppy disks. The
/V switch is used to verify that the copy is valid and is identical
to the original.
The system will prompt you to put the floppy disks into the
disk drives as needed. When the process is finished, the
Z-DOS prompt will reappear.
To obtain additional information on the BACKUP command,
type:
BACKUP ?
and press the ~ g g key . Y our display will show you the
exact syntax and an explanation of the switches that may
be used.
Restoration of the original files to the Winchester disk is also
somewhat selective or automatic. Again, you will find full de-
tails in your Z-DOS Winchester documentation.
To restore the "single" file to the Winchester drive from
your master backup floppy disks, type:
R ESTORE A: BACK1 E: ". ~ / 0 / V