Zenith Z-100 Series, Руководство пользователя

Страница: 46 / 150

Page 45
WINCHESTER SUPPLEMENT
)@stalling Opereting Sy
stems
operating system and assigns disk designators at the time
of bootup. Two names are assigned by CP/M to each
of the floppy disk systems that are connected to the sys-
tem. The names A: and B: are always assigned to the
built in drive (even if only one is present as is the case
with the Winchester system). If external 8" drives are pre-
sent, then C: and D: are assigned to those drives and
E: and F: are assigned to the Winchester disk. If no 8"
system is present, then C: and D: are assigned to the
Winchester disk.
Press the tl
ag @ ] key. The CP/M prompt will reappear.
You are now ready to format the partition.
Type:
FORMAT
and press the g~ g g k e y . The following will be dis-
played:
CP/M-85 Format Version 2. 2, 101
This program is used to ini t i a l i z e a disk.
All i nformation currently on the disk will be destroyed.
Is that what you want? (y/nj
Press the Q key. The display will show:
Which drive do you wish to use for this operation?
You will enter either C or E a s yo u did in when you
selected the CP/M partition with the ASSIGN command.
Your display will show:
wi ll fo rmatp a r t i t i o n a ssi g ned to drive C:
Press RETURN to begin, anything else to abort.
The C will be replaced by an E if you entered an E instead
of a C for the previous prompt.