Zenith Z-100 Series, Руководство пользователя

Страница: 53 / 150

Page 52
WINCHESTER SUPPLEMENT
installing Oper8ting Sy
stems
disk partition. Use the Z-DOS DIR command or the CP/M
STAT command to determine the amount of space required
for your files and the Z-DOS CHKDSK command (or CP/M
STAT command) to determine the amount of space available
on your selected partition(s).
Generally, one partition may be used to hold all of your files,
or you may choose to store selected data files in a second
partition. Drive name considerations need to be considered
as outlined under Drive Name Assignment.
Prepare to Copy Your Files
After you have selected the target partition(s), determine the
names of the files that are to be transferred from the distribu-
tion disk(s) to the partition(s). Use the Z-DOS or CP/M DIR
command to list the names of the files. Exclude any Z-DOS
files named COPYFILE.DAT, as they are batch files used by
the Z-DOS MAKE utility for installing the software on floppy
disk systems.
Copy the Files
If you are using Z-DOS, boot from the Winchester disk parti-
tion of your choice and use the Z-DOS COPY command to
transfer your selected files from the distribution disk(s) to your
Winchester partition(s). With a distribution disk in drive A (the
5.25-inch floppy disk drive), the form of the command is:
COPY A: filename. ext x:
where x is the drive name of the target partition (E or F) and
filename.ext is the name of the file to be copied. Use the
COPY command for all the files that are to be transferred
from the distribution disk(s) to the Winchester partition(s).
Note that you may use wild cards in the filename and exten-
sion to copy multiple files.