Zenith Z-100 Series, Руководство пользователя

Страница: 45 / 150

Page 44
WINCHESTER SUPPLEMENT
Reset your Computer by pressing the (
egg and g~gj
keys at the same time and then releasing them. If your
Computer is set up for auto boot, press the ~
I ~ k ey
to disable this feature. You should see the hand prompt
in the upper right-hand corner of the screen.
Press the
Q and [g keys. Your screen will display:
Boot fl
Press the ~ g g j g key. The floppy disk drive LED ac-
cess indicator will come on and in a moment your screen
will display a message similar to:
CP/M-85 VERSION 2.2.101 01/28/83
A>
The A) is the CP/M system prompt. You must now "as-
sign" your system to work with the CP/M partition.
If you do not have 8" diskettes connected or turned on,
type the following:
ASSIGN C:
=CPM
If you do have 8" disk drives connected to your system
and turned on, type:
ASSIGN E: =CPM
ASSIGN is a CP/M command that will let you access a
partition by name. In this case, you want to be able to
set up the partition that has been named CPM by the
PREP utility. If you are going to work with a different CP/M
partition at this time, you would use that partition's name
in place of CPM as illustrated. The reason two different
disk names (C: or E:) are shown is that CP/M is a dynamic