Zenith Z-100 Series, Руководство пользователя

Страница: 34 / 150

page 33
WINCHESTER SUPPLEMENT
The PART Uti)ity
• If y ou press only the ggggg k e y, the partition name
will remain unchanged while the cursor moves to the next
column, the operating system name.
• If you press the semicolon key or the g/3 key and then
press the ggggg k ey, the partition name will disappear
while the other features of that partition remain the same.
However, after you have finished making an all the entries
for this partition, the old partition name will reappear.
NOTE: Avoid giving two partitions the same partition names
unless you plan to g ive them different operating system
names. Even though PART will not flag the error immediately,
you will see the "duplicate name error" message after you
make the default boot partition entry.
If you want to delete all the entries for this partition, press
" SRBSKKKl
will move up one row. If you remove a partition that was
assigned as the default boot partition, then the "is unde-
fined" message will be displayed for the default boot parti-
tion until a new default boot partition is selected. If you
then attempt to bypass setting the default boot partition,
the "boot partition error" message will be displayed until
you properly specify a default boot partition.
If you do not want to make a change to the partition name,
d o not make any entries; press the g~g g k e y .
If you wish to alter the partition name, type the new name
and press the ggggg key.
Once you press the Qgggg k ey, the cursor will move to
the next column, the operating system name.