Zenith Z-100 Series, Руководство пользователя

Страница: 20 / 150

Page 19
WINCHESTER SUPPLEMENT
The VERIFY Utility
VERIFY OPERATION
To use the VERIFY utility, boot the Utilities disk and type:
VERIFY
and press the ~ g g] k ey. You will see a display similar
to that shown in Figure 3.
VERIFY version 1,00
Copyright(C) 1982, Zenith Data Systems
The VERIFY utilit y helps you to:
• Locate sectors that have failed since you last ran PREP
Do you wish to proceed with VERIFY (Y/N)?
Figure 3
The VERIFY initial display
At the bottom of the display, you will see:
Do you wish to proceed with VERIFY (Y/N)?
If you press the g] key, the program will be halted and control
of the Computer will be returned to Z-DOS. If you press the
Q key, VERIFY will continue operation.
To exit VERIFY, press the g] key. The Z-DOS system
prompt will be displayed.
To continue with VERIFY, press the Q key. You will see:
Enter bad sector address, or zero to end: