Zener MSC-3, Инструкция по эксплуатации

Страница: 109 / 158

IM00120 95 IM00120
MSC-3 Instruction Manual
• Press  to confirm the choice.
ESC
to abandon the change.
Making or braking contact closure on this input activates (or deactivates) timer #2.
See G07 TIMER CONFIG for timer behaviour.
I16 Selector 1, I17 Selector 2 and I18 Selector 3
I16 Selector 1
> OFF I17 Selector 2
> OFF I18 Selector 3
> OFF
Available Choices for each function: See the list of the G01 Inpt fxn CFG menu
• Press

once to begin input selection.
• Use the ▲ / ▼ buttons to select a digital signal source.
• Press

to confirm the choice. ESC to abandon the change.
These inputs form a unique combination for the reference selector. See the Reference Selector feature
description for details
G02 AI(10,11) Config.
The MSC-3 is equipped with a single analogue input as standard and can be configured to receive
either: 0 to 5V, 0 to 10V or 0 to 20mA. Additionally the input has a customisable span as well as a high
and low compare thresholds.
G020 Input Type
G020 Input Type
> Volts
Available Choices: > Volts
> mAmps
• Press  once to begin input selection.
• Use the
▲
/
▼
buttons to select volts or milliamps input operation.
• Press  to confirm the choice. ESC to abandon the change.
The analogue input is configurable for voltage or milliamp input. This selection will configure the input
circuitry for either voltage input or current (mA) input without any need to access MSC-3 hardware. See
the Analogue Inputs and Spanning feature for details.
G021 MIN Input
G021 MIN Input
> 0.0V
Range: 0.0...10.0 V or 0.0 to 20 mA
• Press  to edit the value.
• Press
▲
/
▼
to make changes to the value.
• Press

to accept the new value OR
• Press ESC to abandon the value change.