background image

23 Rev.A

Function

Type of connection

Symbol

USB stick: Music and video playback 

USB

Apple CarPlay 

App use, music and video playback, navigation 

and Siri voice control.

Wireless: Bluetooth and WLAN

Wired: USB

Google Android in-car use

App use, music and video playback, navigation 

and voice control.

Wireless: Bluetooth and WLAN

Wired: USB

Apple iPod music playback

USB

BT source mode – BT speakers: Music playback 

from ZENEC to an external Bluetooth speaker.

Bluetooth

Bluetooth handsfree device

The operation and use of the handsfree device is described in this chapter. All BT settings and 

functions of the Zenec BT system are also described.

In order to be able to use mobile devices in the vehicle via Bluetooth, a one-off Bluetooth connection 

between your ZENEC system and the mobile phone is required. After the one-off connection with 

the ZENEC system, the mobile phone is automatically detected and connected in future. 

Safety instructions

  

CAUTION:

Manual operation of the mobile phone while driving is not permitted. Only make entries or 

modifications via the ZENEC system is the traffic situation permits it.

  

CAUTION:

The network coverage depends on several factors – such as the network provider or the 

geographic situation that the vehicle is in. Tunnels, underpasses, garages or urban canyons in 

cities can lead to an interruption of the connection. Heat protection glazing or metal stickers on 

the windows of the vehicle can also interfere with the connection.

  

 

NOTE:

The operation of integrated information systems and communication devices while driving can 

distract you from the traffic conditions. You may lose control of the vehicle. Risk of accidents. 

Only operate the systems or devices if the traffic situation permits it. If required, stop and operate 

the systems or devices with the vehicle stationary.

CONTROL BAR/TOOLBAR (RIGHT)

The control bar/toolbar with the available menu buttons for calling up the various Bluetooth sub-

menus can be found in the right-hand area of the Bluetooth source. An over of the various Bluetooth 

menu icons, including their functions, can be found below:

Содержание Z-E3776

























































































Отзывы: