ZENEC Z-E3776, Руководство по эксплуатации

Страница: 71 / 88

71 Rev.A
Overview of important operating and display fields in the driver assistant settings:
Setting Operation
Park Assist
< >
Tap the arrow keys to set the display source of the park assist.
Possible settings: Camera / Multiview / Off
Camera: Camera inputs activated (factory setting).
Multiview: Multiview function activated at camera 1 input.
Off: All camera inputs and the multiview function deactivated.
Reverse audio
assistant
< > Tap the arrow keys to configure the muting function with the Park Assist
active.
• Possible settings: Reduc. Vol. / Cam. Audio / Mute Audio / Off
• Reduced volume: The A/V playback volume is reduced or lowered.
• Camera audio: The A/V playback volume is temporarily muted, and the audio
signal of the camera microphone is played back during active camera use.
• Mute audio: All volumes are temporarily muted (factory setting).
Reversing
camera logic
< > Tap the arrow keys to set the camera switchover and manoeuvring logic.
• Possible camera logic settings: Cam. 1 / Cam. 2 / Cam. 3 / Mode 1 / Mode 2
• Camera 1: The reversing function is occupied with camera 1 (factory setting).
• Camera 2: The reversing function is occupied with camera 2.
• Camera 3: The reversing function is occupied with camera 3.
• Mode 1: The camera changeover function / park assist mode 1 is activated.
Automatic changeover between camera 1 and camera 3.
• Mode 2: The camera changeover function / park assist mode 2 is activated.
Automatic changeover between camera 1 and camera 2.
Reversing
camera switch-
off delay
< > Tap the arrow keys to set the switch-off delay value for camera 2 and
camera 3 when using mode 1 and mode 2.
• Possible switch-off delay values: 3 sec. / 5 sec. / 7 sec. / Off
• 3 sec.: The camera is automatically switched off after 3 seconds (factory
setting).
• 5 sec.: The camera is automatically switched off after 5 seconds.
• 7 sec.: The camera is automatically switched off after 7 seconds.
• Off: Switch-off delay deactivated. The camera is switched off immediately.
CAMERA INPUT SETTINGS
In the camera input settings you can influence the camera playback parameters of connected
reversing cameras such as the contrast, brightness, colour saturation and colour shade, which can
be individually adapter for each camera.
CALL UP CAMERA INPUT SETTINGS
1. Call up settings.
or
Call up app list and tap the settings source symbol.