ZENEC Z-E3776 страница 26 Скачать руководство пользователя

Страница: 26 / 88

26 Rev.A

Function

Icon

Operation

Device Manager

Tap to access the device list view.

A symbol on the right next to the device name shows the type of function or use the device is being

used for. An arrow symbol displayed in the direction of the Bluetooth device name shows that an

active connection to the ZENEC system exists. The arrow symbol is shown in the other direction if

the function of the device is inactive or not connected.

Function

Icon

Meaning

Telephony

This symbol indicates that the coupled Bluetooth device

supports HSP/HFP and can be used via the handsfree device.

A2DP

Streaming

Bluetooth audio (A2DP). Playback of music files via Bluetooth

from external devices such as audio devices or mobile phones.

Bluetooth SRC

Mode

(for wireless

music

streaming

on external

Bluetooth

speakers)

This symbol indicates that the coupled external Bluetooth

speaker supports SBC/A2DP and can be used via the

handsfree device for audio streaming (audio playback) from

various media sources such as USB, iPod, DAB and FM.

Couple

Tap to re-connect a coupled Bluetooth device.

Disconnect

Tap to disconnect a coupled Bluetooth device.

Delete

Tap to delete a Bluetooth device from the list (device must be

disconnected to delete it).

Scan (Search)

Tap to search for a new Bluetooth device.

NOTE:

The volume of the sound output with Bluetooth Audio (A2DP) depends on the device. If

necessary, adjust volume setting on Bluetooth device.

GENERAL BLUETOOTH SETTINGS

All basic settings for Bluetooth operation can be made in the Bluetooth setting. In order to make the

required settings, tap the respective field or symbol.

Содержание Z-E3776

























































































Результаты поиска

Содержание Z-E3776

Отзывы:

Похожие инструкции для Z-E3776

Бренды по названию

Популярные бренды

ZENEC Z-E3776, Руководство по эксплуатации

Результаты поиска

Содержание Z-E3776

Отзывы:

Похожие инструкции для Z-E3776

Бренды по названию

Популярные бренды