ZENEC Z-E3776, Руководство по эксплуатации

Страница: 25 / 88

25 Rev.A
Function requirements
• Compatible device with Bluetooth interface.
• ZENEC system is ready for operation.
• Bluetooth is switched on at the mobile phone and the ZENEC system.
• Bluetooth source has been selected and is being displayed
• Bluetooth pre-settings may be needed on the mobile phone, e.g. visibility, see operating
instructions of device.
• For complete phone book synchronisation and display on the ZENEC system, the required
permission must be granted on the mobile phone.
SET UP BLUETOOTH CONNECTION (COUPLING)
1. Active Bluetooth on mobile phone
INFO : Ensure that your mobile phone is visible. You may need to remain in the Bluetooth
settings of your mobile phone during the ZENEC Bluetooth device search with some mobile
phone models, or set the visibility of your mobile phone in the Bluetooth settings.
2. Call up Bluetooth source.
3. Start Bluetooth device search on your ZENEC system. To do this, tap the “Scan(Search) button”
in the device manager list. The Bluetooth name of your mobile phone appears in a search list
of the ZENEC. Another search can be started by tapping “SCAN”.
4. Select the required mobile phone (Bluetooth name of phone) from the list and tap to “Connect new
telephone”.
5. An ID control number is automatically displayed in a pop-up.
6. Compare the ID control number displayed on the ZENEC system with the number on the display
of the mobile BT device. Then confirm the respective pop-up with the ID control number on the
mobile phone and on the ZENEC device.
7. The BT device / mobile phone is connected and displayed in the ZENEC Bluetooth device list .
AUTO CONNECT / AUTOMATIC CONNECTION
If a mobile terminal device is connected to the ZENEC system, this device is automatically
connected when the ZENEC system starts up. In the event of brief disconnection, the ZENEC
system will carry out another connection set-up.
NOTE: During initial coupling, ensure that you confirm “permanent” connection on your mobile
terminal device, otherwise problems may occur during automatic connection.
Ensure that you grant the relevant permission and authorisation for the contact synchronisation
on your mobile phone, otherwise the phone book contacts will not be synchronised.
DEVICE MANAGER
All BT devices that are connected or already coupled with the ZENEC system are displayed in a
device list, where they can be managed.
• A maximum of 7 devices can be connected to the ZENEC system via Bluetooth. A maximum of 20
devices are recognised.